Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Interior Section: Seat
Model Year: 2008 Model: Sequoia Doc ID: RM000002XEY002X
Title: SEAT: LUMBAR SUPPORT ADJUSTER ASSEMBLY (for Manual Seat): REMOVAL (2008 Sequoia)

REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

1. REMOVE FRONT SEAT ASSEMBLY LH

(a) Remove the front seat SEAT: FRONT SEAT ASSEMBLY (for Manual Seat): REMOVAL (2008 Sequoia) .

2. REMOVE VERTICAL SEAT ADJUSTER KNOB CAP SEAT: FRONT SEAT ASSEMBLY (for Manual Seat): DISASSEMBLY (2008 Sequoia)+

3. REMOVE VERTICAL ADJUSTING HANDLE LH SEAT: FRONT SEAT ASSEMBLY (for Manual Seat): DISASSEMBLY (2008 Sequoia)+

4. REMOVE VERTICAL SEAT ADJUSTER KNOB LH SEAT: FRONT SEAT ASSEMBLY (for Manual Seat): DISASSEMBLY (2008 Sequoia)+

5. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH SEAT: FRONT SEAT ASSEMBLY (for Manual Seat): DISASSEMBLY (2008 Sequoia)+

6. REMOVE FRONT SEAT CUSHION SHIELD LH SEAT: FRONT SEAT ASSEMBLY (for Manual Seat): DISASSEMBLY (2008 Sequoia)+

7. REMOVE FRONT SEAT CUSHION SHIELD INNER LH SEAT: FRONT SEAT ASSEMBLY (for Manual Seat): DISASSEMBLY (2008 Sequoia)+

8. REMOVE FRONT SEAT HEADREST ASSEMBLY

9. REMOVE FRONT SEAT HEADREST SUPPORT SEAT: FRONT SEAT ASSEMBLY (for Manual Seat): DISASSEMBLY (2008 Sequoia)+

10. REMOVE SEATBACK COVER WITH PAD SEAT: FRONT SEAT ASSEMBLY (for Manual Seat): DISASSEMBLY (2008 Sequoia)+

11. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH

(a) Remove the 2 springs.

(b) Disengage 6 hooks and remove the seatback spring.

(c) Disconnect the lumbar support adjuster connector.

(d) Remove the 2 screws and lumbar support adjuster assembly.

(e) Disengage 3 claws and remove the bush from the seat frame.